8
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Loosen the screws to remove the lower dome from the camera.
3. Route and connect the cables.
4. Secure the mounting base with camera to the wall with screws as shown below.
5. Three-axis adjustment. Before adjustment, preview the image of the camera on a
monitor and then adjust the camera according to the figure below to get an optimum
angle.
3.0 Installation
Lower Dome
0-360° Pan
0-70° Tilt
0-350° Rotation
