7
2.0 Overview
Security Cap
DC12V
1. Micro SD card slot
2. Light sensor
3. Reset
4. Ethernet connector (PoE)
5. Audio input
6. Power connector
7. Lower Dome
8. Ground
9. Microphone
1. Loosen the nut from the main element.
2. Run the network cable (without RJ 45 connector) through both elements. Then crimp
the cable with RJ 45 connector.
3. Connect the cable to the hermetic connector. Then tighten the nut and the main
cover.
Connecting Network Cable
•
It is recommended to install the security cap for outdoor installation.
•
If the PoE switch is used to power the camera, DC12V power supply is not
required.
