Part No. 133555
Genie TZ-50
41
Operator’s Manual
Third Edition • Third Printing
CG
Observe and Obey:
Only qualifi ed riggers should rig and lift the
machine.
Only certifi ed crane operators should lift the
machine and only in accordance with the
applicable crane regulations.
Be sure the crane capacity, loading surfaces
and straps or lines are suffi cient to withstand
the machine weight. See the serial plate for the
machine weight.
Transport and Lifting Instructions
Lifting Instructions
Fully lower and retract the boom.
Securely latch the boom hold-down latches.
Raise all four outriggers to the stowed position.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and pictures on this page. Measure
from one of the lifting points on the tongue end of
the machine.
Attach the rigging only to the designated lifting
points on the machine.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of Gravity Table
X Axis
Y Axis
ANSI, CSA and Australia
34 cm
41 cm
CE
31 cm
41 cm
Y axis
X axis
Chassis
Lifting
Points (2)
Chassis
Lifting
Points (2)
Tie-down
point
Lifting
point
