User Guide
First Edition • Third Printing
Software Installation
10
Tech Pro™ Link
Part No. 1276689GT
Updating the Machine
Software Using the Tech Pro
Link
1
Install a USB thumb drive into a
PC or laptop.
2
Launch a web browser on your
PC or laptop. Type in the
following IP address:
http://firmware.genielift.com/
3
Select the
Machine Model
drop
down menu, select the model of
the machine to be updated,
then select
Search
.
4
Under
Application Firmware
and / or
Bootloader Firmware
,
select the
.zip
file. Select
I
Accept
, select
Open
.
Note: A window will open displaying
a
.gff
file.
5
Save the
.gff
file to a USB
thumb drive.
6
Remove the USB thumb drive
from the PC or laptop and insert
it into the Tech Pro Link
USB
-
Type A connection port.
Note: The Tech Pro Link must be
turned off to enter Bootloader Mode.
Press and hold the Power button for
3 seconds.
7
Connect the Tech Pro Link to
the machine.
1
Turn the key switch to ground
control and pull out the red
Emergency Stop button to the
on position at both ground and
platform controls.
8
Press and hold the
Left
and
OK
buttons. Press the
Power
button until you see
Preparing
System Bootloader Mode
.
9
Press the
up/down
arrows to
navigate to the
.gff
file to be
installed. Press
OK
to
install the
file.
10
Follow the prompts to complete
the software update.
11
After the software has been
updated, remove the USB
thumb drive.
