First Edition • Third Printing
User Guide
Software Installation
Part No. 1276689GT
Tech Pro™ Link
9
Updating the Tech Pro Link
Software
1
Install a USB thumb drive into a
PC or laptop.
2
Launch a web browser on your
PC or laptop. Type in the
following IP address:
http://firmware.genielift.com/
3
Select the
Controller Type
drop down menu, select
Tech
Pro Link
, then select
Search
.
4
Under
Application Firmware
,
select the
.zip
file. Select
I
Accept
, select
Open.
Note: A window will open displaying
a
.gff
file.
5
Save the
.gff
file to a USB
thumb drive.
6
Remove the USB thumb drive
from the PC or laptop and insert
it into the Tech Pro Link
USB
-
Type A connection port.
Note: The Tech Pro Link must be
turned off to enter Bootloader Mode.
Press and hold the Power button for
3 seconds.
7
Press and hold the
Left
and
OK
buttons. Press the
Power
button until you see
Preparing
System Bootloader Mode
.
8
Press the
up/down
arrows to
navigate to the
.gff
file to be
installed. Press
OK
to install the
file.
9
After the software has been
updated, remove the USB
thumb drive.
