Genie Super Tower, Руководство по обслуживанию

Страница: 29 / 45

September 2016 Service Manual
Base Assembly
Part No. 115411 Super Tower 21
Base Assembl y
1-1 H ow to Rem ov e t he Bas e
1-1
How to Remove the Base
1 Fully lower the carriage.
2 Remove the load handling attachment from
the machine.
3 Remove the outriggers from the outrigger
storage sockets.
4 Attach a lifting strap from an overhead crane
to the lifting eye on the number 1 mast.
5 Place a suitable structure capable of
supporting the machine on the carriage side of
the mast.
6 Carefully lift the machine slightly with the
overhead crane. While lowering it, guide the
machine over onto a suitable structure
capable of supporting it.
Bodily injury hazard. Use proper
lifting techniques when rolling
the mast assembly over.
7 Secure the top of the mast to the support.
8 Attach a lifting strap from an overhead crane
to the base and lift the machine to a horizontal
position. Slide a second suitable structure
capable of supporting it under the mast, next
to the base.
Crushing hazard. The machine
may become unbalanced and fall
if not properly supported by the
overhead crane.
9 Remove the mounting fasteners from both
mast braces at the base.
10 Remove the base mounting fasteners.
Remove the base from the machine.
Note: When installing the base, be sure that the
mast and the base are square.