Genie S-80X, Руководство по эксплуатации

Страница: 53 / 68

Second Edition • First Printing Operator's Manual
Operating Instructions
Part No. 1267884 S-80X 51
Drive Enable
Light on indicates that the boom
has moved just past either
non-steer wheel and the drive
function has been interrupted.
To drive, hold the drive enable switch to either side
and slowly move the drive control handle off
center.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Drive Speed Select

Machine on incline symbol: Low range
operation for inclines or rough terrain

Machine on level surface symbol: High range
operation for maximum drive speed
Engine Idle Select (rpm)
Select engine idle (rpm) using the symbols on the
control panel.
When the foot switch is not pressed, the engine
will idle at the lowest rpm.

Turtle symbol: Foot
switch activated low idle

Rabbit symbol: Foot
switch activated high idle
Generator (if equipped)
To operate the generator, move the generator
toggle switch to the on position.
The generator will turn on and the engine will
continue to run. Pressing down on the foot switch
will turn the generator off. Releasing the foot
switch will turn the generator back on.
Plug a power tool into the power to platform GFCI
outlet.
To stop the generator, move the generator toggle
switch to the off position.