Genie S-80X, Руководство по эксплуатации

Страница: 16 / 68

Operator's Manual Second Edition • First Printing
Work Area Safety
14 S-80X Part No. 1267884
The weight of options and accessories, such as
pipe cradles, panel cradles and welders, will
reduce the rated platform capacity and must be
subtracted from the platform capacity. See the
decals with the options and accessories.
If using accessories, read, understand and obey
the decals, instructions and manuals with the
accessory.
Do not raise or extend the
boom unless the machine
is on a firm, level surface.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds in the platform only when the
machine is on a severe slope.
If the tilt alarm sounds when the platform is raised,
use extreme caution. Identify the condition of the
boom on the slope as shown below. Follow the
steps to lower the boom before moving to a firm,
level surface. Do not rotate the boom while
lowering.
If the tilt alarm sounds with the
platform uphill:
1 Lower the boom.
2 Retract the boom.
If the tilt alarm sounds with the
platform downhill:
1 Retract the boom.
2 Lower the boom.
Do not raise the boom
when wind speeds may
exceed 28 mph /
12.5 m/s. If wind speeds
exceed 28 mph /
12.5 m/s when the boom
is raised, lower the boom
and do not continue to
operate the machine.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed
to the wind will decrease machine stability.