Part No. 72129
Genie Runabout
5
Operator's Manual
First Edition • Sixth Printing
Collision Hazards
Be aware of limited sight
distance and blind spots
when driving or
operating.
Be aware of the extended platform position when
moving the machine.
It is recommended that operators wear an approved
hard hat when operating the machine.
Check the work area for overhead obstructions or
other possible hazards.
Be aware of crushing hazards when grasping the
platform guard rail.
Observe and use the color-coded direction arrows
on the platform controls and platform decal plate for
drive and steer functions.
No stunt driving or horseplay while operating a
machine.
Do not lower the platform unless the area below is
clear of personnel and obstructions.
Limit travel speed according to the condition of the
ground surface, congestion, slope, location of
personnel, and any other factors which may cause
collision.
Do not operate a machine in the path of any crane
or moving overhead machinery unless the controls
of the crane have been locked out and/or
precautions have been taken to prevent any
potential collision.
Crushing Hazard
Use common sense and planning when operating
the machine with the controller from the ground.
Maintain safe distances between the operator, the
machine and fixed objects.
Component Damage Hazard
Do not use the machine as a ground for welding.
Explosion and Fire Hazard
Do not operate the machine or charge the battery in
hazardous locations or locations where potentially
flammable or explosive gases or particles may be
present.
SAFETY RULES
