Express Steam GUV-03
Handle
Connector tube
Power light (green)
Clean water tank
Floor head
Upper cord wrap
Power cord
Lower cord wrap
On/off button
Clean water tank cap
Funnel
Measuring jug (inc. hard water filter)
Microfibre cleaning pads
Carpet glider
What’s wrong...
How to sort me out!
The steamer is not plugged in correctly
Push the plug in firmly
Check and replace the fuse or reset the circuit
Want to know how to maintain your steamer
Turn steamer off and refill water tank
Please visit
thegenierange.co.uk
or call
0844 811 22 80
for advice
If the red light is on, the water tank is empty
My steamer
will not work
properly
Cleaning pad may be saturated with dirt
Wash my microfibre cleaning pad
The cleaning
pad will not
pick up dirt
There may be no water in the tank
Check the plug and switch the steamer on
The steamer may not be switched on
Refill clean water tank
!
Important: Never
use bleach or fabric
softener when washing
the microfibre
cleaning pads.
Twist and pull
the cap to access
the clean water
tank.
Insert the
handle into the
connector tube
at the top of
your steam
cleaner.
Ensure the
locking tab
locks into place
(you should hear
a click).
Turn on/off
button to on
position (’I’)
to steam.
Placing your
foot on the floor
head, pull handle
back. Clean the
area slowly.
To empty the
tank, press release
button and remove
handle.
Unscrew
tank cap and
remove.
Hold your
steamer over
a sink and empty
clean water
tank.
The microfibre
cleaning pads are
machine washable
at 30°C, using a
mild detergent.
They can also
be tumble-dried on
a low heat. Wash
regularly and allow
to dry fully
before use.
Attach cleaning
pad to the floor
head. To secure,
tighten the toggle
on the cleaning
pad.
My steamer
will not produce
steam
Important: Never
leave your steam cleaner
in one place while in use.
!
Important: Test
steam cleaner on a
small inconspicuous
area of hard floor/
carpet before use.
!
Important: Water
tank is empty when
the light is red.
!
Using the funnel
and measuring jug,
fill the clean water
tank, noting MAX
fill water level.
Replace cap.
Note: 1 x 280ml
water tank = 10 mins
steaming time.
For steam
cleaning sealed
hard floor
surfaces...
Important: Ensure unit
has fully cooled before
emptying and storing.
!
Vacuum floors
thoroughly before
using your steam
cleaner.
Vacuum floors
thoroughly before
using your steam
cleaner.
For refreshing
carpets...
Attach carpet
glider over a cleaning
pad if refreshing
carpets. Ensure it is
fitted correctly to
the floor head.
1
1
Either the fuse has blown or circuit in your
home has tripped
It takes
approximately
30 sec. for the
steamer to
heat up.
Once plugged
in, the power
light should be
illuminated
green.
Remove filter from
frame and replace
every 6 months.
Remove the
hard water filter
from the
measuring jug.
2
7
3
4
8
10
11
5
9
6
12
1
13
13
14
3
2
1
6
5
4
7
8
9
10
11
12
13
14
1
1
3
3
5
4
2
2
4
2
3
2
