Genie GTH-636, Руководство по обслуживанию и ремонту

Страница: 42 / 109

Service and Repair Manual April 2018
Fuel and Hydraulic Tanks
32 GTH-636 Part No. 1287209GT
3-1
Fuel and Hydraulic Tanks
How to Remove the Fuel and
Hydraulic Tank Assembly
Explosion and fire hazard.
Engine fuels are combustible.
Remove the fuel tank in an
open, well-ventilated area away
from heaters, sparks, flames
and lighted tobacco. Always
have an approved fire
extinguisher within easy reach.
Explosion and fire hazard.
Never drain or store fuel in an
open container due to the
possibility of fire.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
1 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
FUEL TANK
2 Remove the access cover above the fuel tank
and the access door above the filler cap.
3 Tag and disconnect the wire harness from the
fuel level terminals.
4 Remove the filler cap from the fuel tank.
5 Using an approved hand-operated pump,
drain the fuel tank into a container of suitable
capacity. Refer to Specifications, Machine
Specifications.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and/or diesel fuel.
6 Tag, disconnect and plug the fuel supply and
return hoses. Cap the fittings.
7 Remove the clamps holding the vent hose so
the vent and hose can be removed with the
tank.
8 Remove the fastener securing the fuel tank
straps, unhook and remove. and remove the
tank from the chassis.