Service and Repair Manual
April 2018
Operator's Compartment
28
GTH-636
Part No. 1287209GT
10 Support and secure the operator's
compartment to an adjustable table capable of
supporting the weight and that will allow the
operator's compartment to remain in an
upright and stable position.
Component damage hazard.
Wrapping a strap around the cab
and lifting using an overhead
crane can put excessive
pressure on the glass windows
of the cab, causing the windows
to break. Do not lift the cab using
a strap from an overhead crane if
the strap contacts the windows.
Note: Placing a wedge between the operator's
compartment and the adjustable table may be
required to keep the operator's compartment
stable.
11 Remove the lower fasteners securing the
operator's compartment to the chassis.
12 Remove the upper fasteners securing the
operator's compartment to the chassis.
Crushing hazard. The operator's
compartment will fall if not
properly supported when the
fasteners are removed from the
machine.
13 Slowly move the operator's compartment
away from the chassis while feeding all loose
hoses, cables and wires through the opening
of the chassis.
Component damage hazard.
Hoses, cables and wires can be
damaged if they are kinked or
pinched.
Bolt torque specification
Operator's cab mounting bolts
750 ft-lbs
1017 Nm
2-2
Machine Controls
How to R emove the Steering Col um n
How to Remove the Steering
Column
1 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
2 Remove the fasteners securing the
transmission control lever and turn signal
shifter, if equipped, to the column. Carefully
separate the lever from the column.
3 Remove the nut securing the key switch to the
dash panel. Gently push the key switch
through the opening.
4 Remove the fasteners securing the dash
panel to the dashboard.
5 Carefully pull the dash panel towards the seat
of the operator's compartment.
6 Tag and disconnect the wire harness from the
componments of the dash panel. Remove the
dash panel from the machine.
7 Loosen the two lower fasteners securing the
dash frame to the operator's compartment.
8 Remove the two upper fasteners securing the
dash frame to the operator's compartment.
9 Rotate the dash frame towards the seat of the
operator's compartment.Remove the
dashboard from the machine.
10 Tag and disconnect the ground wire of the
steer column.
11 Support and secure the steer orbitral to the
dash frame.
12 Remove the fasteners securing the steer
column and steer orbitral to the dash frame.
13 Lower the steer orbitral and remove the steer
column from the machine.
Содержание GTH-636
