manualshive.com logo in svg

Genie GTH-1048, Руководство оператора, Страница: 17 / 64

Поделиться
Скачать
Genie GTH-1048 Скачать руководство пользователя страница 17

GENERAL SAFETY

SAFETY ALERT SYMBOL

Stop and take time to read ALL safety alert messages. Follow
all safety messages to avoid injury and/or death.

WARNING

ALWAYS wear eye protection and personal safety equipment.

THE OPERATOR

The operator must be fully trained and qualified to operate this
machine.

Before start-up or machine operation, the operator must learn
the location and purpose of the:

1. Controls
2. Instruments
3. Indicator lights
4. Safety and instruction labels

ACCIDENT PREVENTION

Use protective clothing and safety equipment. Always use
approved safety equipment such as: gloves, safety boots,
safety hard hats, goggles and ear protection when necessary.

Wear protective clothing that is snug and belted where
required.

FIRE PREVENTION/FIRST AID

Install a first-aid kit and fire extinguisher in the operator's cab.

KEEP THE FIRST-AID KIT and FIRE EXTINGUISHER
properly maintained. Follow the instructions provided with the
first-aid kit and fire extinguisher.

GENERAL SAFETY PROCEDURES

2 - 3

Содержание GTH-1048

































































Отзывы:

Нет отзывов