Genie GS-2669 IC, Руководство по обслуживанию и ремонту

Страница: 52 / 171

Service and Repair Manual May 2022
Kubota D1105 Engine
38 GS ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT
4-4
Flex Plate
The flex plate couples the engine to the pump. The
flex plate is bolted to the engine flywheel and has
a splined cutout in the center to engage the pump
coupler.
How to Re mov e th e Fl ex Plate
How to Remove the Flex Plate
1 Attach a lifting strap from an overhead crane
to the pump assembly for support. Do not lift
it.
2 Remove all of the pump mounting plate to
engine fasteners.
3 Carefully pull the pump assembly away from
the engine and secure it from moving.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
4 Remove the flex plate mounting fasteners.
Remove the flex plate from the flywheel.
How to I nstall t he Flex Plat e How to Install the Flex Plate
1 Install the flex plate onto the flywheel with the
raised spline toward the pump.
2 Install the coupler onto the pump shaft with
the set screw towards the pump. Leave a
1/8 inch / 3,175 mm gap between the coupler
and pump end plate. Apply Loctite ®
removable thread locker to the coupler set
screw and torque the set screw to 36-40 ft-lbs
/ 49-54 Nm.
3 Apply Loctite ® removable thread locker to the
flex plate mounting fasteners. Torque the flex
plate mounting fasteners to 40 ft-lbs / 54 Nm.
Component damage hazard. Do
not force the drive pump during
installation or the flex plate teeth
may become damaged.
1 pump
2 pump shaft
3 pump coupler
4 flex plate
5 flywheel
6 1/8 inch / 3.175 mm gap