Genie Genie Z13505-101, Руководство по обслуживанию и ремонту

Страница: 140 / 253

Service and Repair Manual October 2016
Manifolds
128 ZX-135/70 Part No. 1268558
8-10
Traction Manifold Components
The traction manifold is mounted inside the manifold box at the blue triangle side of the machine.
Index
No.
Description
Schematic
Item
Function Torque
1 Check valve, 5 psi / 0.3 bar K Anti-cavitation
30-35 ft-lbs /
40.7-47.5 Nm
2 Solenoid Valve, 2 position 3 way P Two-speed drive motor shift
26-30 ft-lbs /
35.3-40.7 Nm
3 Solenoid Valve, 2 position 3 way Q Brake release
26-30 ft-lbs /
35.3-40.7 Nm
4 Check valve, 5 psi / 0.3 bar R Brake circuit
20-25 ft-lbs /
27.1-33.9 Nm
5 Shuttle Valve, 3 position 3 way D
Charge pressure circuit that directs hot oil
out of low pressure side of drive pumpp 50-55 ft-lbs /
67.8-74.6 Nm
6 Relief valve, 250 psi / 17.23 bar E Charge pressure circuit
20-25 ft-lbs /
27.1-33.9 Nm
7 Orifice Plug, 0.030 inch / 0.762 mm S Brake and two-speed circuit
20-25 ft-lbs /
27.1-33.9 Nm
8 Check valve, 5 psi / 0.3 bar N Drive motor anti-cavitation
20-25 ft-lbs /
27.1-33.9 Nm
9 Check valve, 5 psi / 0.3 bar M Drive motor anti-cavitation
30-35 ft-lbs /
40.7-47.5 Nm
10 Flow divider/combiner valve C
Controls flow to square end drive motors in
forward and reverse 90-100 ft-lbs /
122-135.6 Nm
11 Check valve, 5 psi / 0.3 bar L Drive motor anti-cavitation
20-25 ft-lbs /
27.1-33.9 Nm
12
Flow control valve, 2 gpm / 7.6
L/min
H
Equalizes pressure on both sides of
divider/combiner valve 30-35 ft-lbs /
40.7-47.5 Nm