Genie Genie Lift, Руководство по обслуживанию

Страница: 39 / 45

September 2016 Service Manual
Base Assembly
Part No. 115417 Genie Lift 39
Models with electric winch:
1 Remove the load handling attachment from
the carriage.
2 Fully lower the carriage.
3 Push in the red Emergency Stop button to the
off position.
4 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
5 Remove the battery and battery charger from
the machine.
6 Remove the winch cover fasteners.
7 Tag and disconnect the winch wiring and
remove the winch cover.
8 Remove the old cable following instructions in
the Owner's Manual for Rule Winches (Rule
part number W-1013).
Owner Manual for Rule Winches
Genie part number 85220
Bodily injury hazard. Cables can
fray. Always wear adequate
hand protection when handling
cable.
Install the new cable following the instructions in
the Owner's Manual for Rule Winches.
9 Connect the winch wiring and install the winch
cover on to the machine.
1-7 H ow to Replace the Glide Buttons 1-7
How to Replace the Glide Buttons
1 Remove the load handling attachment from
the carriage.
2 Fully lower the carriage.
Models with counterweight base:
3 Support the base counterweights with a
proper lifting device.
4 Remove the counterweight retaining fasteners
from the base and remove the counterweight
from the base.
Models with electric winch:
5 Push in the red Emergency Stop button to the
off position.
6 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
7 Remove the battery and battery charger from
the machine.
All models:
8 Using proper lifting techniques, lay the
machine over onto a table or other suitable
work surface.