Genie Genie Lift, Руководство по обслуживанию

Страница: 37 / 45

September 2016 Service Manual
Base Assembly
Part No. 115417 Genie Lift 37
1-5 H ow to Replace the Lifting Pulley 1-5
How to Replace the Lifting Pulley
1 Fully lower the carriage.
2 Unwind the cable from the winch drum. Do
not remove the cable.
Bodily injury hazard. Cables can
fray. Always wear adequate
hand protection when handling
cable.
3 Remove the pulley mounting fastener and
remove the pulley from the machine.
4 Wrap the cable around the new pulley and
install the pulley on to the machine.
Note: Be sure not to twist the cable when installing
the new pulley.
1-6 H ow to Replace the Lifting C abl e 1-6
How to Replace the Lifting Cable
Models with manual winch:
1 Fully lower the carriage.
2 Remove the jam nut from the winch drum bolt
and remove the winch drum cover.
3 Remove the cable retaining fastener from the
winch drum and unwind the cable from the
winch drum.
The numbers on the illustration correspond to the
steps in Repair Procedure, How to Replace the
Lifting Cable
.
9
7
5
10
6
Cable slot
8
9
5
10
6
Cable slot
GL-8, GL-10
and GL12
GL-4
Carriage is raised
for illustrative
purpose only