User Manual
LED Monitor
3
Opening the Box
Check that the packing and the contents are not visibly damaged. Contact Bioaccess Sales
Ltd immediately if parts are either missing or damaged. Do not attempt to use the device and
retain its original packing.
Contents of the Box
• Monitor
• Power Adaptor
• HDMI Cable
• User Manual
• Table Stand
Warnings
Power
• Only use the power unit provided to power the device. Check the mains rating
before plugging the power unit in.
• Do not pull the cable to unplug the device.
Safety Precautions
• Keep the device away from rain and excessive humidity to prevent any risk of
electrical hazards. Do not allow any external materials (solid or liquid) inside the
device. If this should accidentally occur, disconnect the device from the mains
and have it inspected by qualified personnel.
• Never open the device. Contact qualified personnel or an authorised service center for
repairs.
• Keep the device away from children to prevent accidental damage.
• Do not touch the device with wet hands to prevent mechanical damage.
• Do not use the device if it should fall or the external casing is damaged. Contact
the Bioaccess Sales Ltd support team or your installer.
• It is advised to disconnect the power wire if the monitor is not used for an
extended period.
Installation Precautions
• To prevent the monitor from overheating, ensure a flow of air through the slots
in the casing is possible. At least 5 cm of free space when installing inside a rack
is reccomended. Additionally, do not install the monitor near sources of heat,
such as radiators or hot air ducts and keep away from direct sunlight. Do not
install the monitor in areas subject to excessive dust, mechanical vibrations or
shocks.
• Do not install the device on an unstable surface because the device could fall
causing damage or mechanical failures.
• Do not install the device in a place where it could be exposed to humidity or
water.
• Stop using the device if water or other material should penetrate inside: risk of
fire and electrical faults. Contact the Bioaccess Sales Ltd support team or an
authorised installer.