- 13 -
Under the above-mentioned conditions, the automatic overload guard of the motor is
triggered, whereupon the current feed to the device is interrupted. In such a case,
please take the following steps:
1. Disconnect the main plug from the AC socket in order to avoid the risk of serious
injuries and wait at least 60 minutes until the overload guard has reset. Now tear
off excess paper from the top of the shredder or remove it.
2. Reconnect the main plug to the AC socket and press the REVERSE button. Pull
the remaining paper away from the shredding blades. Afterwards,
press the
FORWARD button. If necessary, repeat this step.
3. With pressing the FORWARD button and the open feed slot, you may now continue
the normal shredding process.
Technical data:
Shredding type:
Cross-cut
Size of cut:
4 x 35 mm (paper), 3 pieces (CD/DVD)
Shredding capacity:
10 pages DIN A4 (80g), 1 CD/DVD or credit card
Feed width:
approx. 220 mm
Feed width for CDs/DVDs:
approx. 122 mm
Input voltage:
220~240 VAC, 50 Hz, 1,5 A
Dimensions:
approx. 345 x 235 x 440 mm
Waste basket:
ca. 14 l capacity
Noise level:
approx. 72 dB
Cleaning:
Danger! Unplug the power cord before cleaning. There is a risk of electric shock!
Warning! The blades of the device are very sharp! Danger of injury!
1. Empty the drip trays regularly.
2. Clean the drip trays and paper cutter with a slightly dampened cloth and possibly
with a mild detergent.
3. Remove any residue in the cutting holes with a suitable object.
Make sure that
while cleaning the plug is pulled in order to avoid injuries.
