GENI PREMIUMa, Руководство пользователя, Страница: 27 / 36

27
How to adjust the sensitivity of individual keys
2) Wearing headphones to monitor the sound, play each key and
listen to the volume of the sound to find the key tobe adjusted.
System Setting
1) Right after turning on the GENIO PREMIUM
α
, immediately
press and hold [RECORD] button before the system gets ready
to be used. Release [RECORD] button.
* The display should now look like the right side: The system is now ready
to be adjusted.
KEY SENSE ADJ.
Number :
Sense :
Push [Rec.] to Finish.
KEY SENSE ADJ.
Number : 57
Sense : 130
Push [Rec.] to Finish.
HOME
Preset Sound
P1 : Piano 1
The initialization procedure on the previous page should make all of the keys equally sensitive.
If you find that some keys still play too loudly or softly, use the following procedure to adjust the
sensitivity of individual key.
3) When you find the key to be adjusted, press [
▼
] or [
▲
] to adjust
the sensitivity you need.
*
[
▼
] : less sensitive
*
[
▲
] : more sensitive
*
It adjust the key last pressed, so you’d better to adjust after confirm
the key number
*
Sensitivity range : 1~255
4) Check and adjust the other keys with same way as above, press
[RECORD] button to save the adjustment, then GENIO PREMIUM
α
is ready to be played.
con: Control Unit Firmware
key: sensor Rail Firmware
Adjust the default sound(from preset 16) whenever power on
Adjust the default volume whenever power on
(Default: 60, Range: 0~100)
Range: 0~-79dB, Default: -10dB
Range: 0~-79dB, Default: 0dB, Same as setting volume
Reset the system and memory to the original version from the
manufacturers.
Range:0~12/ Default: manufacturers se
t
Always on, 10 Secs, 20 Secs, 30 Secs.
(with option backup battery) adjust the internal time
Note off when playing trills. (ON/OFF, Default: On)
off, 10~400, Default: 250
off, 10~300, Default: off
1~16, Default: 1
Default: 30minute, Range: 5n(minute)~12h(Hour)
Each pedal’s operating position setting
(Range: 0~-10steps, Default: 5)
Adjusting softness of soft pedal 60~90%, Default 70%
Start-up Sound
Start-up Volume
Line-in Gain
Line-out Gain
System initialization
LCD Contrast
LCD Back ligh
Time set
Keyboard mode
Correction of repeated
key touch
Correction of key touch
blending
MIDI output channel
Automatic power off time
setting
Pedal positioning
Soft Pedal Adjustment
Firmware Version Check
(Non-changable)
1) Press both [FUNC.]+ [SOUND] buttons together to show system
setting screen from the Home mode.
2) Press [FUNC.] button to select one menu from the list bellow.
3) Press either [
▼
] or [
▲
] button to change the value.
4) Press [SOUND] button to save and return to Home mode.
SYSTEM
Control v1.03
Key v1.05
[1]
Control
Key
Start-Up Preset
Start-Up Volume
Start-Up Line I/O
Start-Up Line I/O
Memory Initialize
LCD Contrast
LCD Back light
0000/00/00
Insert Note-off
Key Correction
Key Correction
MIDI output ch.
Power-off time
Pedal-on Adj.
Pedal-soft Adj.
[ 1 ]
[ 2 ]
[ 3 ]
[ 4 ]
[ 5 ]
[ 6 ]
[ 7 ]
[ 8 ]
[ 9 ]
[10]
[11]
[12]
[13]
[14]
[15]
[16]