GENI PREMIUMa, Руководство пользователя, Страница: 25 / 36

25
Initializing GENIO PREMIUM
α
GENIO PREMIUM
α
enables you to hear your own sound during the piano muting. The signals
generated by actinography from the sensors underneath the keys convert into MIDI signals
which are needed for generating the piano sound by control unit’s program. Since GENIO
PREMIUM
α
adopts continuous position detective photo sensors, after installation, by initial -
izing process, it records the characteristics of keys and sensors into the memory storage to
generate the sounds. Without correct initializing process, some keys have no sound, or gener -
ate irregular sound, so it is essential to initialize perfectly to keep the best performance.
A. Before Initializing
1) Every connection of cables should be perfect.
2) The mute lever should be in mute position.
3) Make sure that nothing is sitting on the keys that might
press keys down.
4) Mechanical regulation of the piano action like let-off
should be perfect to prevent malfunction.
Mute Lever
Silent Piano
Position
Acoustic Piano
Position
Note :
Please initialize GENIO PREMIUM
α
properly if the piano is not used for a long time or
recently moved. (The height of the keys can be changed)
B. How to Initialize GENIO PREMIUM
α
1) Right after turning on the GENIO PREMIUM
α
, immediately press and hold [METRO.] button
before the system gets ready to be used. Release [METRO.] button. And then, the display shows :
*
88 key mode : n88 / 85 key mode : n85
If the key mode should be changed, press and hold [METRO.] button for more than 2 seconds.
Preset Sound
P1 : Piano 1
HOME
4) After completion of the initializing all keys and pedals, press [METRO.]
BUTTON again.
* When the data is successfully stored, the display will change as shown
and the piano is ready to be played.
3) After the above process, please press all keys and pedals AGAIN to check if you can hear
each note’s sound well or not.
* If a certain key is not initialized (if you cannot hear the sound), press and hold that key for more than 2 seconds
again, that key would be re-initialized. (It remembers the last key position.)
* If the key is not re-initialized after pressed again, turn off the system and try from the first step.
2) Press each of 88 keys and pedals one by one, all with slowly and softly.
*
Don’t press next key before the prior key is not released.
*
Once a key is initialized, you can hear the corresponding key sound.
*
Once you softly press the initialized key again, you can hear the key sound.