Section 3 - General Use
3. Clean internal parts once a year with a brush and strong vacuum cleaner.
2. Keep internal optical path free from dust or cobwebs.
1. Wipe lens clean regularly.
To maintain maximum brightness, clean the unit regularly with a damp cloth o
r
glass cleaner. Do not use alcohol or solvents.
Warning: Disconnect power and let unit cool before handling. Never open uni t
when in use. Keep away from water and other liquids.
Maintenance
4. Dispose lamps properly. Keep old lamps away from children and animals.
2. Note that the lamp holder assembly includes a lever. While holding the
cup-shaped lamp reflector in one hand, pull the lever toward the back of the
unit.
3. With one hand holding the lamp socket, gently pull the cup-shaped lamp
reflector stem out of the lamp socket.
1. Loosen the two screws (T3) on the lamp cover (T2). Remove cover (T2).
3. Dispose lamps properly. Keep old lamps away from children and animals.
2.
With
one hand on the lamp socke
t, pu
ll th
e lam
p stem
awa
y from
th
e lam
p
sock et.
1. Loosen the two screws (T3) on the unit cover (T2). Remove cover (T2).
Disconnect power, let unit cool, then follow the directions below for your
specific product.
Lamp Removal
CB-250B
CB-250 and CB-250T
10
5. Replace unit cover (F2) and fasten screws (F3) firmly.
4. Slide the reflector cup fully down into the lamp holder. The lamp lever will
move forward.
3 Holding the lamp reflector cup in one hand and the lamp socket in the other,
.
insert the lamp pins into the holes in the lamp socket.
2. Remove lamp from pa ckaging. Read lamp instructions . Do not touc h lam p
bulb with bare hands, as this could damage the lamp. (Lamp not included with
Color Blaster color changer.)
TM
2. "Daisy chain" the color changers as illustrated in
DMX Basics
. Always use
h
igh q uality, t wisted p air 1 20 o hm sh ielded, 22 or 24 AW
G, bra ided shi eld
microphone cables and three-pin canon XLR connectors.
1. Use a 12-kg rated or stronger clamp to fasten Color Blaste r color changer
bracket (T1) onto a good t russ. A llowo ne m eter o n a ll si desfo r pr oper co oling.
Keep unit away from liquids a nd f lammable i t ems. A djust t il t a n d tig hten
bracket knob (T4).
Follow the steps below to install Color Blaster color changer.
Color Changer Installation
TM
TM
1. Loosen the two screws (T3) on the unit cover (T2). Remove the cover.
CB-250 and CB-250T
3. Set Function dip switch #6. Flip the dip switch as appropriate with either a
toothpick or ballpoint pen.I n a reas w ith 5 0 H z p ower su pply, tu rn Fu ction dip
switch #6 off. In areas with 60 Hz power, turn Fuction dip switch #6 on.
4. Use appropriate power supply for your unit. Plug mains power supply cord
into the unit's mains IEC power s ocket ( B5), t hen p lug o ther e nd in to
appropriate power supply socket.
5. Adjust focus. First, turn on Function dip (F3 ) switc h #4 : a whi te sp ot w ill
appear, then rotate lens until a good focus is obtained.
5
Содержание Color Blaster CB-250
Страница 2: ......
