Genexis FiberTwist P3000B, Руководство по установке

Страница: 5 / 7

Remove dust cap
1 . Take the FiberTwist out of the box.
2 . The dust cap is connected to the red string
located on the rear of the FiberTwist.
3 . Remove the dust cap by pulling the red string.
4 . Store the dust cap in a safe place.
Twist!
1 . Place the FiberTwist on the FTU as shown in the picture below,
in a 30 –degree angle.
2 . Rotate clockwise until it clicks into place.
3 . Make sure the FiberTwist is aligned squarely on the FTU,
each edge must line up directly with the FTU below.
Your FiberTwist is now installed!