Finish installation
• Remove the remaining protective cap from the FiberTwist coupler.
• Place the FMU with the installed fibers on the baseplate.
• Click the transparent cover on the baseplate and FMU.
• Fasten the cover to the baseplate with the screw provided.
• If required, place a seal over the screw.
• Install the active unit or blind cover.
Patch-in
(optional)
The device supports the ability to patch in fiber cables.
These connectors are pre-installed in the FMU.
• Please connect the fiber patch cable from the third-party FTU to the
patch-in port of the FiberTwist FTU. Depending on the model, you need
to place an SC or LC connector.
