Genex GX9000 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 64

Genex GX9000 Скачать руководство пользователя страница 44

GX9000 User manual

Rev 2.1

Recording

Genex Audio Inc

Page 47

Insert On

Newly recorded audio files are inserted at the current timecode position. On
playback any audio that shared the same time position as the newly recorded
audio will not be heard. The audio files will still exist on disk but the Audio
Decision List (ADL) will instruct the GX9000 to play the new files instead.

Insert Off

If an ADL Project file is open and the

Current ADL

or

Copy ADL

mode is

selected, newly recorded audio files are inserted at the end of the current
Play List. This mode is equivalent to repeatedly pressing Stop and Record on
a Tape Machine without pressing Play or Locating in between; the recording
is always made at the end of the previous take. The result is a consecutive
list of takes described by one ADL Project File. This mode is useful for
Classical location or live recording.

DSD IFF

If a DSD IFF audio file is open, pressing the

Insert

button prior to Record will

set the GX9000 to overwrite existing audio and modify the open file. The
recording is destructive and previous data will be permanently overwritten.
No new audio file will be generated. If the Insert LED is on but no DSD IFF
file is open for playback a new DSD IFF audio file will be generated.

If the Insert LED is off a new DSD IFF audio file will be generated.

The GX9000 has three record modes accessible from the

Record

menu.

The different record modes are relevant to the AES31 and AES31-DSD
file formats only.

In addition if no ADL Project file is open is open all Record

modes behave identically and the following sequence occurs on dropping into
Record.

If all ADL Project Files are Closed

•

A new folder is generated to hold the ADL and Audio Files.

•

An audio file is generated for each record armed channel. Each file is

time stamped with the current Generator Timecode.

•

Audio Decision List (.ADL) and Cue Point (.CPT) files are generated and

stored in the new folder.

If an ADL Project File is Open

If an ADL file is open the three ADL Generation modes exhibit different
behaviors when punching into Record.

Mode I - (Append to) Current ADL

Newly recorded audio files are generated in the current folder and the
corresponding event entries are appended to the currently open ADL. The
maximum number of files that can be described by one ADL is 960. Once this
limit is reached a new ADL is automatically generated.

•

Press

the

Setup

button.

•

Use

the

Rotary Wheel

to select the

Projects

menu.

•

Use

the

Parameter Up

and

Parameter Down

buttons to select the

.ADL Gen

heading.

•

Use

the

Value Down

and

Value Up

buttons to select the

Current

option.

•

Press

the

Enter

button to store the selection.

Mode II - (Generate) New ADL

A new folder is generated every time

Record or Record-Play

is pressed and

a new ADL Project File is stored in the new folder to describe the resulting

«
...
42
43
44
45
46
...
»

Содержание GX9000

































































Отзывы:

Нет отзывов