Genex GX9000 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 64

Genex GX9000 Скачать руководство пользователя страница 11

GX9000 User Manual

Rev 2.1

Working with Media

Working with Media

Genex Audio Inc

Page 14

The GX9000 has two bays accessible from the front panel and designed to house a variety of SCSI
media devices. Most commonly the bays will be fitted with removable Kingston style frames, ready to
receive carriers fitted with Hard Drives or Tape Drives. The bays can also be fitted with MO drives,
recordable DVD drives or any other standard profile SCSI device.

The GX9000 supports hot-swapping of SCSI devices, you can insert or remove a device at any time
while the unit is powered up. SCSI ID indicators to the right of each drive bay show the SCSI ID of the
device. For the case where a Kingston receiving frame is installed the ID is repeated on the Kingston
frame.

Blanking Plates

The GX9000 is supplied with one Front Panel blanking plate as standard, fitted to the lower drive bay.
If only external drives are to be used with the GX9000 a second blanking plate must be fitted to
ensure adequate cooling of the unit. If only one SCSI device is to be fitted, mount the device in the
upper drive bay. When fitting a second device first remove the blanking plate.

Installation and Removal of Front Panel Blanking Plates

No additional information is available at present.

Hard Drives

Installation and Removal of Kingston Receiving Frame

The following picture shows the correct way to connect the internal split SCSI ID cable to two front
panel mounted Kingston Receiving frames so that the rear panel DIP switches correctly control the
ID’s and the correct SCSI ID’s are displayed on the Front Panel.

«
...
9
10
11
12
13
...
»

Содержание GX9000

































































Отзывы:

Нет отзывов