GENEVO PRO II, Руководство пользователя и инструкция по установке

Страница: 2 / 9

2 3
MAIN FEATURES
OF GENEVO PRO II:
GENEVO PRO II is our most
advanced built-in radar detector,
with modern automatic features.
It is designed primarily to protect
the driver from unnecessary
penalties for speeding thanks to
reliable detection of:
• Microwave radars (K, Ka).
• MultaRadars CT and CD.
• GATSO RT3 and RT4 radars.
• Red-light cameras.
• Stationary speed cameras.
• Section speed cameras (using
GPS updatable database).
ALERT INTERPRETATION:
In the case of a radar alert,
a visual warning appears on the
display. A voice refers to the radar
band and the intensity of the
intermittent tone ( beep) express-
es the strength of the received
signal. The signal strength has
nine levels for better distance
expression. GPS points are
reported verbally, such as “section
speed cameras”.
ADVANCED FEATURES:
• A magnetic display, easily remov-
able for instant deactivation of
the system.
• Motion sensor for contactless
operation. Silence the alert
without having to search for the
right button.
• Ambient light sensor for auto-
matic brightness adjustment.
The display automatically adjusts
the brightness according to the
amount of light in the cabin.
• Noise sensor in the cabin. The
detector automatically adjusts
the alert volume according to the
level of noise inside the vehicle.
EXPLANATORY NOTES:
Radar bands: Different radar
bands are used to measure speed,
most often Ka, K, X, or newer
MultaRadars and Gatso Radars
that have extremely low transmit
power and are hard to detect.
CONGRATULATIONS ON
PURCHASING GENEVO PRO II,
THE WORLD´S MOST ADVANCED
RADAR DETECTOR.
Different bands and frequencies
are used in each country, it is
therefore necessary to have the
detector set up correctly for each
country.
• Ka: One of the most common-
ly used radar band for speed
measuring.
• K: The most widely used band
at all, is comonnly used for au-
tomatic doors at petrol stations
and shops, adaptive cruise
control, etc. Devices operating in
the “K” band cause false alerts,
so their quality filtration is
essential.
• X: Minimally used band, mainly
in some Eastern European
countries.
• Multaradars CD/CT: modern
radars used in Austria, Iceland,
Netherlands, Poland, Portugal,
Slovakia, Spain. Their detection is
difficult and requires a specially
modified antenna (HDM+).
• GATSO radars: Are hardest to
detect and can be in a station-
ary or a mobile form. They
are used in Belgium, France,
Finland, Great Britain, Lithuania,
Netherlands, Slovenia. They are
divided into RT2/RT3/RT4 - a
higher number means a more
modern version. The detection
of these radars is possible only
by the latest and most sensitive
detector.
• Narrow: Narrowed bands.
Frequency of a specific part of a
band is detected in the narrowed
band to increase sensitivity and
eliminate false alerts.
• Wide: Broadband mode, on the
other hand, searches the entire
band. In Ka band from 33.4 GHz
to 36.0 GHz. Use this setting
only if absolutely necessary, as it
shortens the detection distance
and increases the number of
false alerts.
Filters and false alerts: For the
correct functioning of the detec-
tor, it is essential to filter unwant-
ed radar signals from sources oth-
er than police radars (eg adaptive
cruise control of modern vehicles),
so that the detector reports only
police radars. The filter settings
are further described on page 7
in the manual (ALERTS NOTIFICA-
TION SETTINGS).
Laser measurement: Laser speed
measurement is based on emit-
ting an ultra narrow and short-
time beam of electromagnetic
light at the level of infrared radi-
ation. The signal is transmitted
for a very short time at a specific
place (usually car’s licence plate)
and therefore, it is almost imposi-
ble to detect it in advance. The
only effective protection against
laser speed measurement is an
additional active laser system.
GPS: The GPS antenna also de-
tects measurements that do not
emit any signals. These include
section speed cameras, stationary
speed cameras (induction loops)
or “red-light cameras”. We keep
adding everything continuously
to the GPS database of stationary
threats - all you have to do is keep
the detector updated.