manualshive.com logo in svg

Genesys S-TEC 3100, Руководство по эксплуатации для пилотов

Поделиться
Скачать
Genesys S-TEC 3100 Скачать руководство пользователя страница 12

Section 1 Overview

2nd Ed Aug 2019

S-TEC 3100 Digital and Analog

1-6

NOTE:

The autopilot always follows the source selected by the GPS 1/2 

selector switch regardless of the source displayed on the PFD. Always 

ensure the GPS 1/2 selector switch position matches the navigation 

source displayed on the PFD.

1.7.  INTERFACED AVIONICS

The S-TEC 3100 may be setup to integrate with both analog and digital 

systems, which includes (but not limited to) the following.

1.7.1.  

Garmin G500/G600/TXi EFIS

All mode annunciation is displayed on the 3100 bezel, but the G500/600/

TXi does not display 3100 AFCS mode annunciations. 
Altitude pre-select is available and the 3100 reads VS, IAS and ALT targets 

set on the EFIS display (§ 3.8.5).
If a target is set using the 3100 bezel directly, this supersedes any existing 

targets from the EFIS and the new target is displayed as the altitude 

annunciation.
Flight director command bars are displayed on the EFIS.

NOTE:

The G500/600/TXi does not update the EFIS displayed targets set on 

the 3100 bezel directly.

1.7.2.  

Aspen EFD 500/1000/MAX

All mode annunciations are displayed on the 3100 bezel, but the EFD1000 

does not display 3100 AFCS mode annunciations. 
Indicated airspeed data is not provided from the Aspen EFD1000. Therefore, 

some installations may not have IAS mode or envelope protection unless 

supplemented with additional air data equipment.

This interface uses the 3100 internal altitude pre-select. VS, IAS, and ALT 

targets cannot be set using the PFD bugs (§ 3.8.5).

Содержание S-TEC 3100















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды