Genesys EXPO 4 Скачать руководство пользователя страница 6

Страница: 6 / 8

Finish the cladding of the run by attaching the last upright.

Once your back cladding with uprights are in place, make sure
the bay is square and tighten all loose screws.

Build the frames for the connecting bay.

Refer to the assembly

instructions for the particular system you are building.

- Expo 3 uses shelf carriers to connect the uprights into frames
- Expoo 4 uses battens to connect the uprights into frames

Install the shelves.

Refer to the assembly instructions for the

particular system you are building.

- Expo 3 shelves are inserted into shelf carriers
- Expoo 4 shelves are connected using shelf clips

H 3000mm

Long section

1045mm Clad

1345mm Clad

H 2500mm

Diagram - Screw Positions for Solid Steel Cladding on Expo Upright

Position where the screw connects the clad sheet with the upright

Same as above + the two clad sheets (or four clad sheets on an extension bay) overlap here

Position to be kept without screw

The side of the clad sheet where the ﬁrst hole is further from the edge than on the other side.

Make sure the long section is at the right side (top or bottom) when installing the cladding.

H 2200mm

H 2000mm

Long section

Содержание EXPO 4








