Side Cladding Installation
1
1
2
2
3
3
Side Cladding is installed in the first part of the
bay assembly, when two uprights are connected
either by battens (expo 4) or shelf carriers (expo3)
with feet attached - so you have completed step 2
on the bay assembly instructions.
1.
Lean the connected frame to the side and slide
in the first steel sheet clad in between the uprights
inner gaps.
2.
Attach plastic joining rib to the top of the first
steel sheet clad.
3.
Slide in another steel sheet clad panel the
same way as the first one to sit in the ridge of the
joining rib.
4.
Once all frames requiring side cladding are
assembled, continue building the bay as
described on the bay assembly instructions
- step 3 and onwards.
Mesh Side Panel Installation
Mesh Side panels can be attached at any time
after the bay has been assembled.
1.
Insert the Cable tie into the upright’s inner gap
via the 13mm diameter hole.
2.
Position the mesh as required and loop the tie
around the outer wire of the mesh.
3.
Repeat the process along the whole height of
the bay and on both sides of the mesh. Use as
many ties as required - approx 2-3 ties per meter
per side.
4.
Install all the additional mesh as required.
4
4
Steel Clad
Uprights
Top View
Uprights
Cable Ties
Mesh Panel
Steel Clad
Steel Clad
Plastic Joining Rib
EXPO SIDE CLADDING
Assembly Instructions
