Genesis nG1, Инструкция по эксплуатации

Страница: 24 / 32

24
S t o p P l a t e A s s e m b l y ( 7 1 2 1 3 - 0 3 9 0 0 )
S e r v i c i n g t h e To o l
Assembly (see illustration below)
•
Place ‘O’ Ring 2 into the recess in Housing 5 retain in position using grease Molykote
®
55m.
•
Assemble ‘O’ Ring 4 onto Piston 1 and push assembly into Housing 5 making sure it is in as far as it will go.
•
Position the slot in Piston 1 parallel to the step face in Housing 5 .
•
Slide Plate Shut Off 3 into the assembled parts 1 , 2 , 4 , and 5 . Retain parts in place using grease Molykote
®
55m.
•
Place ‘O’ Ring 4 into the recess of Cover Plate 6 retain in position using grease Molykote
®
55m.
•
Place Spring 7 into position, locate using the recesses in both Plate Shut Off 3 and Bottle Adaptor Assembly 31* .
•
Position the above assembled parts onto Bottle Adaptor Assembly 31* .
•
Secure in position using two Screws 63* .
*see pages 26 and 27.
2
1
3
4
4
5
6
7
31*
63*
1 PISTON
2 ‘O’ RING
3 PLATE SHUT OFF
4 ‘O’ RING
5 HOUSING
6 COVER PLATE
7 SPRING
ITEM DESCRIPTION
CLOSED
OPEN