Genesis GV70, Руководство пользователя

Страница: 452 / 710

7-42
Driver assistance system
Blind-Spot Collision-Avoidance
Assist disabled
OJKEV072230L OJKEV072230L
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain,
or installing a trailer or carrier, it can
reduce the detecting performance and
temporarily limit or disable Blind-Spot
Collision-Avoidance Assist.
If this occurs, the ‘Blind-spot safety
system(s) disabled. Radar blocked’
warning message will appear on the
cluster.
Blind-Spot Collision-Avoidance Assist
will operate properly when such foreign
material or trailer, etc., is removed, and
then the vehicle is restarted.
If Blind-Spot Collision-Avoidance
Assist does not operate properly after
it is removed, we recommend that the
vehicle be inspected by an authorized
retailer of Genesis Branded products.
WARNING
• Even though the warning message
does not appear on the cluster, Blind-
Spot Collision-Avoidance Assist may
not properly operate.
•
Blind-Spot Collision-Avoidance
Assist may not properly operate in
an area (for example, open terrain)
where any objects are not detected
right after the vehicle is turned on, or
when the detecting sensor is blocked
with foreign material right after the
vehicle is turned on.
CAUTION
Turn off Blind-Spot Collision-Avoidance
Assist to install or remove a trailer,
carrier, or another attachment. Turn on
Blind-Spot Collision-Avoidance Assist
when finished.
Limitations of Blind-Spot Collision-
Avoidance Assist
Blind-Spot Collision-Avoidance Assist
may not operate properly, or it may
operate unexpectedly under the
following circumstances:
• There is inclement weather, such as
heavy snow, heavy rain, etc.
• The detecting sensor is covered with
snow, rain, dirt, etc.
• The temperature around the
detecting sensor is high or low due to
surrounding environment.
• The detecting sensor is blocked while
driving near a vehicle, pillar, or wall.
• Driving on a highway (or motorway)
ramp or driving through a tollgate.