Genesis GV70, Руководство пользователя

Страница: 445 / 710

7-35
07
CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensor:
• Never disassemble the detecting
sensor assembly, or cause any
damage to it.
• If the detecting sensor or the area
near the sensor has been damaged
or impacted in any way, even though
the warning message does not
appear on the cluster, Blind-Spot
Collision-Avoidance Assist may not
operate properly. We recommend
that the vehicle be inspected by
an authorized retailer of Genesis
Branded products.
• If the detecting sensors have been
replaced or repaired, we recommend
that the vehicle be inspected by
an authorized retailer of Genesis
Branded products.
•
Use only genuine parts to repair the
front bumper or rear bumper where
the rear corner radar is located.
•
Rear bumper genuine parts with
rear corner radars have proven their
performance. Replacing or painting
the rear bumper may result in poor
performance of Blind-Spot Collision-
Avoidance Assist. When the parts
need to be replaced or modified,
make sure to use qualified products.
• Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
• Blind-Spot Collision-Avoidance
Assist may not work properly if the
bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
•
If a trailer, carrier, etc., is installed,
it may adversely affect the
performance of the rear corner radar
or Blind-Spot Collision-Avoidance
Assist may not operate.
• For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in this chapter.
Blind-Spot Collision-Avoidance
Assist settings
Blind-spot safety
OJKEV072264L OJKEV072264L
With the vehicle on, select or deselect
‘Driver assistance → Blind-spot safety’
from the Settings menu to set whether to
use each function.
• If ‘Active assist’ is selected, Blind-Spot
Collision-Avoidance Assist will warn
the driver with a warning message, an
audible warning and steering wheel
vibration depending on the collision
risk levels. Braking assist will be
applied depending on the collision
risk levels.
• If ‘Warning only’ is selected, Blind-
Spot Collision-Avoidance Assist
will warn the driver with a warning
message, an audible warning and
steering wheel vibration depending
on the collision risk levels. Braking will
not be assisted.
• If ‘Off’ is selected, Blind-Spot
Collision-Avoidance Assist will turn
off.