Genesis GenWatch3 GW RSP25, Книга

Страница: 26 / 30

26
600- 2.16.15 -EE.1
Your GenWatch3 GW_RSP25 module may be licensed to a specific list of talkgroups. You
can check this via the View License button on GW_LaunchPad. If your GW_RSP25 license
information contains WACN, System and Talkgroup information, then you are licensed to a
specific list of talkgroups. If you are licensed in this way, creating a
Filter User will not override
this license restriction (i.e., allow you to see more talkgroups than you are licensed for). However,
you can use a
Filter User to allow GenWatch3 to only process a subset of the talkgroups that you
are licensed for. This is particularly useful if you, as a system owner, are licensed for twelve
talkgroups, and you are setting up an agency-based installation of GenWatch3 and you want this
agency to only view activity on four of your twelve talkgroups.
More on Raw Data Files
GenWatch3 stores raw data files on your GenWatch3 computer. Genesis and
Motorola support personnel use these files to help diagnose control channel
decode issues you may have with GenWatch3.
By default, GenWatch3 will keep five weeks’ worth of raw data files
(approximately 1.2 GB). You may wish to conserve hard drive space by choosing
to keep only one week’s worth of raw data files. We suggest you keep the full five
weeks, just in case it takes you awhile to notice a control channel decode issue.
These raw data files are stored in the following directory:
<GenWatch3 Data
Directory>\RawData\RSP25\<WACNId>\<SystemId>\<RFSSId>\<SiteId>
In the default GenWatch3 installation directory, if the WACN ID is BEE00, the
System ID is 1404, the RFSS ID is 1 and the site ID is 10, the GenWatch3 raw
data directory is:
C:\ProgramData\Genesis\GenWatch3\
RawData\RSP25\BEE00\1404\1\10
The files in this directory are in the following format:
GW3_<year><month><day>_<hour>.RAW
The raw data file for the 3:00pm hour on 10/12/2020 would be:
GW3_20201012_15.RAW