- 10 -
Switch to the ON position to enter the live mode. The Motion
Indicator will flash red for about 10 seconds and the camera starts
working by itself without any manual handling. It will at once
shoot pictures or record videos when game or other objects enter
the PIR area of the main sensor directly. If the game enters the
PIR area of the prep sensors from the side, the prep sensors detect
the movement and activate the camera. While the game keeps
moving into the PIR area of the main sensor, the camera takes
photos/videos immediately. If the game roams away after entering
the PIR area of the prep sensors, the camera will power off and
enter standby mode.
ADVANTAGES OF PREP SENSORS
In general, to save battery power, an Infer-Red camera is in
“sleep” mode, with only the PIR sensor working. When game is
detected by the PIR sensor, the camera is powered on and starts
shooting pictures. The time period from being activated to starting
firing is called trigger time. The trigger time varies among
different hunting camera brands in the market, generally from 1 to
5 plus seconds. Our hunting camera has an impressive 1 second
trigger time. However, when game passes across very quickly, the
picture may only capture the rear part of the body, and possibly
nothing at all.
With the unique side prep PIR sensors design, our hunting camera
solves this issue. The combination of the two side prep sensors
and the main sensor comes up with a 100 to 140° angle of
induction, a very wide scope far outweighing the 140 ° angle of
the camera lens. When game first crosses the PIR area of the prep
sensor, the camera is activated and ready to shoot after 1 second.
