Generex CS121BL, Руководство пользователя

Страница: 39 / 166

37
Figure 34: HTTP - Job Editor: Logfile entry
Example above: The text “Powerfail” will written into the logfile every 100 seconds for as long
as the event is present. Other actions on events such as Email, RCCMD shutdown, UPS-
Dialer, TempMan etc. can be configured in the same way. Each event may have an unlimited
number of actions (executed now, delayed etc.).
4.2.13.3 Email-Job
Figure 35: HTTP - Job Editor: Email-Job
To configure an Email-job follow the entries in the figure above.
Note: Please as
sure that your Email settings in the menu “Email” are valid.
Beside text entries (up to 511 signs), variables can also be integrated into the email from the
CS121. This may personalize your emails. A list of available variables are documentated in the
appendix. Please note, that the variables are only getting filled, if the event actually occurs, not
by testing the action (so a simulation is not possible, you have to create a real alarm to see the
full message).
For example please see the figure above: There, the variables #MODEL and
#AUTONOMTIME will be substituted with their current values, when the action will be
released.
Please notice the syntax, that each variable name must be started with the character # and
must be ended with a <space> character.
Apply your settings and test the Email-
job in the “Event Editor” to ensure Email will be
sent.
Continuous, periodic events:
To define an event job, which will be executed continuous, e. g. daily, create a job for the event
„UPSMAN started“ like in the following figure:
Figure 36: HTTP - Job Editor: Continuous event job
4.2.13.4 Email-To-SMS
In order to send a SMS message in case of an alarm, you have to use the “Email to SMS
Service” of your GSM provider. This is a service where the UPSMAN sends an email to the