Mounting Instructions M-15
- Connect the cable [3] to the CPU board.
- Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1]
- Fix the AUDIO/VIDEO Board [1] to the threaded locations of the support [B]
- Check that the two jumpers JP1 e JP2 [E] are set to position "A"
and to the CPU [A] and amplifier [D] boards.
and that the jumper J1 [F] is set to position "A".
- Locate the CPU Board [A] and insert the buffer modules [2] into the connectors [H].
KIT 970291 (PAL) - KIT 970292 (NTSC) - A/V Kit with Vocal Processor
by means of the screw [8].
ENGLISH
2) 2 buffer modules
8) 4 screws (M3x8)
3) 34 contacts x 7.5cm flat cable
1) Audio/Video board PAL
4) 9 contacts x 15cm flat cable
Audio/Video board NTSC
7) 2 contacts x 10cm cable
6) 10 contacts x 40cm flat cable
9) Video Cable PAL (Din to Scart)
Video Cable NTSC (Din to Rca)
10) Vocal Processor Demo Disk
NOTE: the system disk is already supplied with
11) Vocal Processor Owner’s Manual
5) 16 contacts x 7.5cm flat cable
the keyboard.
Part List:
(840204)
(761143)
(841004)
(761093)
(761152)
(130428)
(841009)
(841049)
(841025)
(130317)
(120003)
(271200)
(955990)
Mounting
Instructions
The jumper J1 [F] must be set
on A position if the buffer modules
are installed, on B position if the
SIMM dram modules are
NOTE:
Model
SK760-SK880
Leave the jumper J2 on its
position.
intalled.
Locate the jumpers [E] accordingly with the code shown on the label sticked to the board: * 730668 **731020
Mounting Instructions M-15
- Connect the cable [3] to the CPU board.
- Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1]
- Fix the AUDIO/VIDEO Board [1] to the threaded locations of the support [B]
- Check that the two jumpers JP1 e JP2 [E] are set to position "A"
and to the CPU [A] and amplifier [D] boards.
and that the jumper J1 [F] is set to position "A".
- Locate the CPU Board [A] and insert the buffer modules [2] into the connectors [H].
KIT 970291 (PAL) - KIT 970292 (NTSC) - A/V Kit with Vocal Processor
by means of the screw [8].
ENGLISH
2) 2 buffer modules
8) 4 screws (M3x8)
3) 34 contacts x 7.5cm flat cable
1) Audio/Video board PAL
4) 9 contacts x 15cm flat cable
Audio/Video board NTSC
7) 2 contacts x 10cm cable
6) 10 contacts x 40cm flat cable
9) Video Cable PAL (Din to Scart)
Video Cable NTSC (Din to Rca)
10) Vocal Processor Demo Disk
NOTE: the system disk is already supplied with
11) Vocal Processor Owner’s Manual
5) 16 contacts x 7.5cm flat cable
the keyboard.
Part List:
(840204)
(761143)
(841004)
(761093)
(761152)
(130428)
(841009)
(841049)
(841025)
(130317)
(120003)
(271200)
(955990)
Mounting
Instructions
The jumper J1 [F] must be set
on A position if the buffer modules
are installed, on B position if the
SIMM dram modules are
NOTE:
Model
SK760-SK880
Leave the jumper J2 on its
position.
intalled.
Locate the jumpers [E] accordingly with the code shown on the label sticked to the board: * 730668 **731020
