General 850-3, Руководство пользователя

Страница: 7 / 23

BASIC FUNCTIONS
This cabinet saw has been designed for cutting solid wood as well as manufactured wood materials such as ply-
wood, wood paneling, particleboard, MDF and other wood-based by-products. This saw is not designed for cutting
metals nor for cutting any materials other than wood or wood-based stock .
This saw is designed for use with maximum 10" (254 mm) diameter blades having a center hole diameter of 5/ 8" .
The blade can be raised to cut a maximum stock thickness of 3 l / 8 " with the blade set 90 degrees to the table. The
blade can be tilted up to 45 degrees to the left for bevel cuts to a maximum stock thickness of 2 l /8". Using any
standard aftermarket 8" diameter stacked dado blade set (not included), the maximum dado cutting capacity of this
saw is 13/16". Note: for safer dado cutting, an optional dado table insert can be purchased through your General ®
MFG / General ® International dist r ibutor .
To encourage safety through the proper use of either the supplied riving style splitter/blade guard assembly or the
European style riving knife the 850 saw has been designed with a quick install/quick release feature allowing the
user to install or remove either of these safety components in seconds.
UNPACKING
Carefully unpack and remove the saw from the crate . All
other components and accessories are packed inside
the saw cabinet. Check for damaged or missing items as
per the list of contents below.
NOTE: Please report any damaged or missing items to
your General@ International distributor immediately.
LIST OF CONTENTS
SAW ………………………………...………………………1
SPLITTER /BLADE GUARD ASSEMBLY ..................................1
ANTI KICKBACK PAWL ASSEMBLV ............................................ 1
ARBOR WRENCH.............................................................. 1
MITER GAUGE .................................................................. 1
PUSH STICL ………………………………………………….. 1
NOTE: F-42 rip fence and T-50 guide rails are
packaged separately.
ADDITIONAL REQUIREMENTS FOR
set
UP
• Phillips Screwdriver
• 1/2", 7/16" and 9/16" and openend wrench
• l /8" Allen key
• Square
or