20
General System Setup and Operation
Setting the Alerts to Get-Out-Of-Bed ( only)
The Zmachine can be set to generate alerts to get-out-of-bed when the patient has not fallen
asleep within the prescribed time interval (called a Sleep Onset alert), or when the patient has
fallen asleep successfully, but woke and was unable to fall back to sleep within the prescribed
interval (called a Sleep Maintenance alert).
To change the alerting:
i)
Access the Zmachine System Menu.
ii)
Select
Setup Actions
iii)
Select
Patient Alerts
iv)
Select
Sleep Onset
and press to toggle enabled/disabled.
a.
A check mark indicates that the function is enabled.
v)
Select
Sleep Maint.
and press to toggle enabled/disabled.
a.
A check mark indicates that the function is enabled.
→
→
Note:
A check mark indicates that the alert is enabled.
