4.2. Test Fixture
General Photonics provides a test fixture and cables to facilitate power connections to
the BPD-002-OEM for testing.
Mating connectors to the
BPD-002-OEM’s power
connectors, used to mount
BPD-002-OEM to the test
board.
Connectors for cables to
connect to power supply
Color coded cables to
connect test fixture to
power supply
Figure 6 Test fixture and power cables
To use the test fixture with the BPD-002-OEM:
1. Mount the BPD-002-OEM to the board by connecting the power connectors on
the bottom of the BPD to the mating connectors on the board. The pins are
labeled.
2. Connect the 3 power cables to the corresponding connectors on the board. The
cables are color coded.
Red: +5V
Green: Ground
Black:
−
5V
Document #: GP-IN-BPD-002-OEM-11
Page 9 of 11
