General Music rp-x, Руководство пользователя

Страница: 18 / 100

Page 12
owners manual
rp-x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
r p -x
EXIT THE PERFORMANCE STORE
COPY THE PERFORMANCE
Once your PERFORMANCE edit it's complete press the
blinking PERF button on the display.
1
At this point both the PERF button and the digit
"P01" in the display (indicating the number of the
edited performance in this example)�� blink at the
same time.
2
3
Select a performance to be copied. 1
Press the EDIT button
2
Press the PERF button in the display�� the selected
performance number start blinking on the display.
3
Select a destination memory PERFORMANCE location
using the DATA buttons.
4
Keep the PERF button pressed to STORE the PERFOR-
MANCE in the new location.
5
The PERF LED and the display will stop blinking.
The PERF number is showed again on the display to
comfirm the STORE operation. The EDIT button LED
goes OFF
5
The selected PERFORMANCE is the SOURCE performance, the data contained in this location will be copied in a destination
memory location you'll select in the next stage #4
At this stage it's possible to exit the STORE procedure
by simply pressing the EDIT button. The LED will stop
blinking and the edited data will be deleted. The
display show again the PERF number you start to
edit�� while the EDIT button LED goes OFF.
Use the DATA buttons to select a PERFORMANCE
location. It's possible to select any of the 99 available
memory locations.
To help the edit operation the module allows you to copy the PERFORMANCE data to any other available location. In
this way it's easier to create, for example, different versions of the same split or layer PERFORMANCE.