GENERAL LIFE HT500 SET, Руководство пользователя

Страница: 13 / 22

HT500 SET Reset And Sync:
Sync while setup:
Sync signal is sent to receiver if “ ” button is pressed for 4 seconds.
Sync while using the device:
First the device is setted to off-mode by pressing “ ” button.
Then sync signal is sent to receiver if “ ” button is pressed for 4 seconds..
Wi-Fi Reset while setup:
Device is reset by pressing “ ” button for 4 seconds. Thus new
setup can start.
Wi-Fi Reset while using the device:
First the device is setted to off-mode by pressing “ ”
button. Device is reset by pressing “ ” button for 4 seconds. Thus new setup can start.
7- HT500 SET SMART ROOM THERMOSTAT PLACEMENT
Place your HT500 Smart Room Termostat in a room where you most use it as your living
area. For example: living room. Be attentive to placement in the area of wireless internet
modem zone at home by reason of the signal is sent via internet connection to room
thermostat. Avoid installing the HT500 SET where there is a lot of air circulation such as
door entry or window edges. Also, do not place in places near heat units (central heating
system, fireplace, etc.) and places that receive direct sunlight. We recommend that the room
thermostat be placed at an altitude of 50 cm to 150 cm from the floor. You can try a few
places to find the most suitable place.
10
M M
M
50 cm-150 cm
50 cm