4
5
5
6
7
ENGLISH
HT120 SET USER MANUAL
DECLARATION OF CONFORMITY
ISIPARK İÇ VE DIŞ TİC. İNŞ. ISITMA SİSTEMLERİ OTO. SAN.A.Ş.which
Head Office and production site is located on Fatih Mah. 1188
Sk.No:13/A Sarnıç - Gaziemir - İZMİR – TÜRKİYE confirms and
declares that the product marked with CE and its specifications below
is covered by the provisions of the mentioned directive.
Brand
Product Name
Product Type
Compatible Directives:
Radio and Telecommunications Terminal Equipment Regulation
2014/53/EU (R&TTE/RED EN 301 489-1 V2.1.1:2017, EN 300 220-1
V3.1.1:2017, EN 301 489-3 V2.1.1:2017, EN 300 220-2 V3.1.1:2017, EN
62479: 2010, EN 60730-2-9:2010, EN 60730-1:2011)
Electromagnetic Compatibility Regulation 2014/30/EU (EMC EN
61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007
Low Voltage Directive 2014/35/EU (LVD EN 60730-2-9:2010, EN
60730-1:2011)
Supplementary Information: Mentioned product can be used with
combi boilers with on / off output and compatibility with the directive
only covers the product. ISIPARK is not responsible for the
compliance of the entire system with the directive. This declaration
does not apply when changes are made to the product without
obtaining our consent.
WARRANTY CONDITIONS
1- Warranty starts at the delivery date of devices and equpments and
warranted against manufacturing defect for 2 years.
2-Devices and equipments are delivered to customers in operation.
Mounting and other connections will be additional fee for service.
3- Devices will maintenance and repair in our factory and should send
by contracted transportation company. For out services,
transportation and accommodation of service personnel are covered
by customers. Overtime is added on service charge and is received as
cash proceeds.
4- Maintenance of devices and equipments will be in our factory. For
device maintenance, the round travel fares are covered by customers.
5- If devices are malfunction in warranty duration, devices will be
inspected in our factory to find out whose responsibility
(manufacturer or customer) and will announce to user by report.
6- Devices, which malfunctioned in warranty duration and found out it
is responsibility of manufacturer, customer can demand new product
or repair which all costs will fulfilled by manufacturer regarding to
cost is not higher than device.
7- After inspection of malfunction and detected that, it is customer's
fault, repair cost of the device which still in warranty duration will be
customer's responsibility.
8- Customers should be aware of damages (if there is any) of product
and warn manufacturer since the day warranty duration starts. If
customer do not warn manufacturer with knowledge of damage,
customer lose the rights of article 6.
9- Devices and equipments should be used as specified in User's
Manual if not used as specified, products are out of warranty.
10- If products damaged, scratched or cracked by customer. The
products will be out of warranty conditions.
11- Damages/Malfunctions because of using other brand' s and
model' s devices and equipments without knowledge of
manufacturer are out of warranty.
12- Failures due to battery leakage and acidic / damp conditions and
rust, oxidation and liquid contact are out of warranty.
13- When the product is not used for a long time (more than 15 days),
remove the batteries. Otherwise, malfunctions that will occur are out
of warranty.
14- The transport damage is out of warranty. Customers can take a
transportation insurance.
15- Damages by virtue of grid voltage are out of warranty.
16- Damages because of force majeure like flood, earthquake, fire etc.
are out of warranty.
17- All parts of the product are under warranty of our company.
18- If product breaks down and gets fixed in warranty duration,
duration of maintenance adds to the warranty duration. Products
repairment can't exceed 20 work days. This duration starts when the
product's problems are reported to the seller, agency, producer or the
importer if there is no service station. Consumer can report the
problem by; fax, e-mail, registered and reply paid letter or a similar
way. If a conflict happens, the consumer has the responsibility of
proofing it. If the problem can't be solved more than 10 days the
producer or importer has to supply a similar device until end of the
reparation. If the product breaks down because of material, label or
mounting faults in the warranty duration, firm won't demand label
costs, changing parts or any other kind of charge for repairment.
19- Despite consumers rights of maintenance;
- If the product breaks down for 4 times in a year or 6 times in warranty
duration and these problems effects main purpose of the product.
(starting from delivery time during warranty.),
- Exceeding the maximum repairing term,
- In the case of not existing service station, determining that
repairment is not possible with the report compiled by respectively
service station's seller, dealer, agency, legation, importer or
manufacturer.
20- You may apply for Ministry of Custom and Trade and General
Directorate of Protection of Costumers and Market Surveillance in
case of the problems about certificate of warranty.
21- Warranty document should be kept by customer until warranty
duration is finished. If warranty is lost there will be no replacement. All
maintance and repair cost is responsibility of customer in case of
warranty document lost.
RECEIVER WIRING DIAGRAM
Warning!
Only persons who have got Professional Competence should make
operations electric wiring or boiler setup.
SYNC ROOM THERMOSTAT AND RECEIVER
Press the button for 3 seconds when room thermostat is off. You
will see the heating calibration setting menü, after you press one
more time, you will see sync menu which written as “Adr”.
Primarily press the sync button of receiver for 2 seconds and see
blinking green light of receiver. Then turn up the button to right or
left way.
Green light on the receiver will be stably and signal sound will be
heard from receiver.
.Room Thermostat and Receiver synced
ROOM THERMOSTAT HEATING CALIBRATION
Temperature sensors which are used for room thermostats, are very
sensitive. No other
thermometers in your living area have that sensitivity. You can
calibrate your room thermostat if you would like to get the
temperature of the other thermometers in your living space.
Press the button for 3 seconds when the device is off
In order to see the desired temperature, set the temperature
difference by turning the button to right or left. This value can be set
between -8 and +8.
Exit the menu by pressing the button.
o
Note:
Recommended tempreture calibration is “0.0 C”.
COM NO
: GENERAL Life
: HT120 SET
: Digital Room Thermostat
Manufacturer
Title: ISIPARK İÇ DIŞ TİC. A.Ş.
Adsress: Fatih Mah. 1188 Sk. No:13/A Sarnıç
Gaziemir İzmir-TÜRKİYE
Tel: 0 (232) 457 99 50
Fax: 0 (232) 457 91 22
E-Mail: [email protected]
Authorised Signatory:
Company Stamp:
Product
Type: Digital Room Thermostat
Brand: GENERAL Life
Model: HT120 SET
Guarantee Period: 2 Years
Max. Time to Repair: 20 Days
Banderole and Serial Number:
Vendor
Title:
Address:
Tel: Fax:
E-Mail: Invoice Date and Number:
Delivery Time and Place:
Authorised Signatory:
Company Stamp:
Product
Type: Digital Room Thermostat
Brand: GENERAL Life
Model: HT120 SET
STAMP
generallife.com.tr
DIGITAL ROOM THERMOSTAT
WARRANTY CERTIFICATE
Isıpark reserves the rights of changing product specifications and
user manuals.
*For all changes,you may visit generallife.com.tr
