This machine is not designed to function as a replacement for a woodworking dust collector. A woodworking dust
collector is connected, normally via a dust hose, to woodworking machinery and draws sawdust and woodchips
directly from the source (such as a blade, bit or cutting tool) – this is a different and separate operation from the
one performed by this machine.
The 2-stage filtration system includes a high efficiency inner 3-pouch filter that can capture up to 85% of airborne
dust particles as small as 1 micron, and an outer pleated filter that can capture up to 98% of airborne dust particles
as small as 5 microns.
With a rated air movement capacity of 800 cubic feet per minute this unit will re-circulate and filter all of the air in
a 15’ x 20’ x 8’ room up to 20 times per hour.
Featuring continuous run or timer operation, including 1-15 hour timer settings, the unit can be programmed to run
and continue to filter dust particles that are suspended in the ambient air in the workshop for up to 15 hours (in
1 hour increments), after you have completed your work in the shop.
The 10-550 Pro Turbo air cleaner can be either ceiling mounted (additional hardware may be required) or set on a
table, workbench or floor.
THIS UNIT IS NOT DESIGNED TO REPLACE PERSONAL BREATHING PROTECTION DEVICES SUCH AS RESPIRATORS OR
DUST MASKS.
TO ENSURE YOUR PERSONAL PROTECTION YOU MUST CONTINUE TO USE PERSONAL BREATHING PROTECTION
DEVICES WHENEVER RECOMMENDED FOR THE OPERATION OR WORK BEING PERFORMED.
THE 10-550 PRO TURBO AIR CLEANER IS DESIGNED TO CAPTURE SOLID, DRY, NON-METALLIC AIRBORNE DUST PARTI-
CLES ONLY. IT IS NOT DESIGNED (AND CANNOT BE RETRO-FITTED) TO FILTER OR PROTECT THE USER FROM PAINT
FUMES OR OVERSPRAY, NOXIOUS, HAZARDOUS, OR HARMFUL CHEMICAL FUMES, VOLATILE ORGANIC COMPOUNDS
(V.O.C’S), OR FOUL, UNPLEASANT OR HARMFUL ORDERS.
PREPARATION & INSTALLATION BEFORE USING
CARRYING & HANDLING THE UNIT
The air cleaner weighs 68 LBS (approximately 31 kg) and can
be carried using the two lifting handles inset on the sides of the
cabinet.
Whenever lifting or carrying the air cleaner, do so with the filters
positioned away from the body to avoid damaging the filters
through unintentional contact with belt buckles and zippers.
Fig. 1
Handle
REMOVING THE STYROFOAM BLOCKS
To help protect the interior components from damage during
transportation, styrofoam blocks were inserted at the factory,
above and below the fan housing inside of the cabinet.
BEFORE PLUGGING IN AND USING THE AIR CLEANER THESE
STYROFOAM BLOCKS MUST BE REMOVED.
Fig. 2
7