LIST OF CONTENTS
QTY
AIR CLEANER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RUBBER FEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
5/16 - 18 FLANGE NUTS . . . . . . . . . . . . . . . . . . . .4
5/16 - 18 x 1 1/2” EYE-BOLTS . . . . . . . . . . . . . . . .4
REMOTE CONTROL
(REQUIRES 2 AAA BATTERIES - NOT SUPPLIED)
.
1
“PRO TURBO” AIR CLEANING SYSTEM
10-550
UNPACKING & SET-UP
FOR YOUR OWN SAFETY, DO NOT CONNECT THE
MACHINE TO A POWER SOURCE UNTIL YOU HAVE
READ AND UNDERSTOOD THIS MANUAL AND ALL
SAFETY AND OPERATING INSTRUCTIONS.
ADDITIONAL REQUIREMENTS FOR SET-UP
UNPACKING
Carefully unpack and remove the unit and its compo-
nents from the box and check for missing or damaged
items as per the list of contents below.
Note: Report any missing or damaged items to your
General International distributor immediately.
Note: For ceiling mount installation, extra hardware
such as mounting hooks, rope, or chain (not included)
may be required.
• Adjustable Wrench
• Large Flat-Head Screw Driver
• Extra Person for Help with Lifting
BASIC FUNCTIONS OF THIS UNIT
The model 10-550 “PRO TURBO” air cleaner is designed to quietly and efficiently filter non-metallic airborne dust par-
ticles in the workshop. This unit is not a woodworking dust collector, but when used in conjunction with an adequate
and properly connected dust collector, this air cleaner can help to reduce the risks and health hazards associated
with airborne dust particles in the workshop and contribute to a cleaner, safer work environment for the user.
6