General International 50-eb3, Руководство по установке и эксплуатации

Страница: 7 / 10

REVERSING THE GUIDE
When it becomes necessary to work on the opposite side of the blade, the EB-3 can easily and
quickly be reversed.
1) Set the miter guide to 90˚ using the detent
plunger. Lock the arm in position with the
angle clamp knob.
2) Loosen the eccentric lock screw inside the
outer brace using the allen key provided.
3) Rotate the adjuster left or right until the
guide is at a true 90˚. Confirm the angle with
your calibration square.
4) Tighten the eccentric lock screw securely.
7
CALIBRATION ADJUSTMENT
1) Remove the fence clamp
knobs located on the fence
mount. 2) Separate the fence and
clamp bar assembly from
the fence mount. 3) Loosen the angle clamp
knob and pull the inner
brace out of the outer
brace.
4) Rotate both the fence
mount and the outer brace
to the opposite side of the
guide bar. Slide the inner
brace back into the outer
brace and tighten the angle
clamp knob. 5) Insert the clamp bar
assembly threaded studs
through the front of the
fence mount and secure
using fence clamp knob. 6) Insert the clamp bar
assembly threaded studs
through the front of the
fence mount and secure
using fence clamp knob. The
fence extension can be
removed and inserted into
the opposite end of the
fence as well.