(4).Landing gear door Installation & Testing. (29-38)
39
(5).Vector Vent Installation.(39-43)
9
10
F-16
F-16
28
27
25
26
29
30
32
31
34
33
35
36
Installation is finished.
Installation is finished.
Punch holes in retract door as shown.
Installation is finished.
Install EDF cover as shown and fixed it with screws.
Open the retract door, use the string to lock the
landing gear, then through the string out from the
hole in the door, shown as picture.
Close the landing gear and door, install the wire
clasp to lock the string, cut it in the suitable
position, then glue it and fix it.
37
38
Fix the landing gear in the neutral position,
then install the steering push rod.
Glue the ESC and fix it as shown.
Glue the fuselage and combine them as shown.
Glue another side of the spring hinges then connect
them as per the corresponding mounting hole
of fuselage.
Glue the spring hinges and mount them in landing
gear doors as per the right position as shown.
