Outside Case
1. Disconnect external power and turn off the computer.
2.
Remove the battery.
3. Add a small amount of water to a soft cloth and clean the computer case. Do not use paper
products because they can scratch the surface.
4. Wipe off any excess liquid with a soft cloth.
5.
Reinstall the battery
.
CAUTION Aerosols, solvents, or strong detergents are not recommended cleaning solutions
and may void your warranty. For system decontamination recommendations please contact your
support representative.
Display
Use a soft, dry cloth. In some cases, you can use a small amount of water to remove streaks or smears.
For difficult display cleaning tasks, use a 50/50 mixture of Isopropyl Alcohol and Water. Do not use
paper products because they can scratch the screen.
External Power Connector
The external power connector may sometimes be exposed to moisture and/or contamination causing an
unreliable connection to the external power source. Clean the connector with a cotton swab dipped in
electronics grade isopropyl alcohol.
RJ-11/ RJ-45 / USB Connectors
If the connector pins get dirty, clean the connector with a cotton swab dipped in electronics grade
isopropyl alcohol.
Backup and Recovery
Data Backup
There are several methods to backup your data. It is best to regularly use all the methods below to ensure
the greatest data integrity, provide the fastest recovery options, and minimize downtime.
After you have installed all your applications and have your computer configured as desired, create a
backup of drive C: using the Hard Disk Backup and Recovery Utility. Then, use the Windows Backup
Utility on a frequent basis to backup your daily data. It is recommended that you schedule the Windows
72_0130_001
2006-07-10
© 2006 Itronix Corporation. All rights reserved.
GoBook
®
XR-1 Help
Page 84 of 92
GoBook XR-1 Help
8/3/2006
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh2D1C.htm
