V7.x Packet Controllers
PCL Controller Overview
032R440-000
Xedge 6000 Hardware
4-13
Issue 17
Installation & Setup Guide
PCL Slot Locations
Figure 4-4
Installing the PCL in Xedge Chassis Platforms
Note
The initial model of the Xedge PCL(1) slot controller is intended for operation only in the Xedge 6002 chassis.
A later model of the Xedge PCL(2) is intended for nonslot-0 use in all higher density Xedge chassis platforms.
Note
to properly set the S1 rotary switch on the PCL for the intended chassis and slot.
Note
Slot 0 redundancy is typically provided by ISG2 controllers in Xedge 6280, 6640 or 6645 chassos platforms.
Xedge PCL cannot be installed in Main Slot 0 of Xedge 6640 or 6645 chassis.
6
5
4
3
2
1
0
FAN
TRAY
ESD
SF
SF
(STDBY)
0
(STDBY)
Slot Controller
Slots 1/2
Slot Controller
Slot 0 Main
Switch Fabric
SF Main
PCL(2)
Slot Controller
Slots 3/4
Slot Controller
Slot 6
Slot Controller
Slot 5
Switch Fabric
SF Stby
Slot Controller
Slot 0 Stby
Slot Controller
Slot 0 Stb
y
Switch F
abr
ic
SF Stb
y
Slwitch F
abr
ic
SF Main
Slot Controller
Slot 0 Main
Slot Controller
Slot 6
Slot Controller
Slot 5
(Blank)
Slot 7
(Blank)
Slot 9
(Blank)
(Blank)
Slot 15
(Blank)
Slot 14
(Blank)
Slot 13
(Blank)
Slot 12
(Blank)
Slot 11
(Blank)
Slot 10
(Blank)
Slot 8
(Blank)
Slot Controller
P
C
L
2
Slot 3/4
1
0
Craft
ESD
Strap
ESD
Strap
3
2
1
0
SF
Xedge 6640/6645
Xedge 6160
Xedge 6280
Xedge 6002
PCL(1)
Slot Controller
Slots 0/1
Switch Fabric
Slot Controller
Slot 0
PCL(2)
Slot Controller
Slots 2/3
Slot Controller
Slot 1
Non Slot 0
Non Slot 0
Non
Slot 0
Non
Slot 0
Slots
0/1
Slot 1
(Blank)
Slot 2
(Blank)