![background image](http://html1.mh-extra.com/html/general-datacomm/sc-adt-16-por/sc-adt-16-por_installation-and-operation-manual_2210292007.webp)
076R172-000
SpectraComm ADT
v
Issue 6
Installation and Operation Manual
Preface
Scope of this Manual
This manual describes how to install, configure and operate any model of the SpectraComm
Asynchronous Data Transport card: the SC-ADT 8-port card, the SC-ADT 16-port card or the SC-
ADT 32-port cards. All models of the SC-ADT have the same operational capabilities other than
the number of front panel ports. where noted. The information contained in this manual has been
carefully checked and is believed to be entirely reliable. This information is intended for installers,
service technicians and users and assumes a working knowledge in the design, planning and
management of IP networks.
As General DataComm improves the reliability, function, and design of their products, it is possible
that the information in this document may not be current. Contact General DataComm, your sales
representative or point your browser to
http:\\www.gdc.com
for the latest information on
this and other General DataComm products.
General DataComm, Inc.
6 Rubber Avenue. Naugatuck, Connecticut 06770 U.S.A.
Tel: 1 203 729-0271
Toll Free: 1 800 523-1737
Manual Organization
This manual is divided into the following chapters. When using the digital version of this manual,
click on any link (shown in blue text) to jump to that section.
•
Chapter 1, Introduction & Specifications
describes the SpectraComm ADT features and options. This chapter contains an overview of
product design, intended use and technical specifications.
•
Chapter 2, Installation & Connections
procedures for installing the SC-ADT in a SpectraComm shelf system or enclosure.
•
Chapter 3, SC-ADT Configuration
procedures for initializing the SC-ADT and configuring basic operation parameters, such as
User Accounts, interfaces, ports and the internal/external modem, if so equipped.
The terminal, Telnet, and CLI interfaces are also described.
•
description of the web-based (HTTP) interface and web-based CLI used to configure and
control the SC-ADT operation in a SpectraComm shelf.
•
Chapter 5, Additional Features
information and procedures on additional SC-ADT features, such as Time Protocols,
Authentication Protocol, Modem Security, Contact Sense, the Telnet Menu,
Status and Alarm logs, Port Alerts, SNMP Traps, Connect/Disconnect Controls, etc.
•
Appendix A, Application Guidelines
useful information on SC-ADT factory defaults, access modes, the command line interface
and any special application considerations.
Содержание SC-ADT 16 Por
Страница 6: ...iv SpectraCommADT 076R172 000 Installation and Operation Manual Issue 6 Table of Contents...
Страница 92: ...Additional Features SNMP Traps 5 24 SpectraCommADT 076R172 000 Installation and Operation Manual Issue 6...
Страница 105: ......
Страница 106: ...The Best Connections in the Business...